Post by thumper59 on Jan 23, 2011 10:32:04 GMT -6
We are experiencing trouble with our local cable company,, charter communications,, with internet dropping out,,, for most people this is not so much of a problem,,, but the camera setup relies on timing,,, we run more than 1 program to stream the feed... as far as the tv we watch here it is just a 1 second glitch,,, but for the camera stream,, i causes need for a reset,,, charter communications is aware and says their working on it... and i'm trying to get the manycam software slightly changed,,, so hang in there,,, not a single one of us likes the cam down... getting too close to egg time...
here are some of my posts trying to get a solution for an auto restart setup...
On 1/23/2011 10:12 AM, J`R wrote:
> trying in the manycam forum to see if a script can be written,,, or if the program can be slightly changed
>
> jim ray says:
> January 23, 2011 at 11:09 am
>
> any gurus in here that can tell me how to make a restart script for manycam. our internet service ocassionally drops out,, then manycam looses the axis capture driver,,,( its source). we have to right click on tray icon,, exit, then start manycam,, then select source.. this is not really a manycam problem,,, but when i ran the webcam using windows media encoder someone wrote a restart script..
>
> thnx
> jim ray
> jim ray says:
> January 23, 2011 at 11:17 am
>
> forgot to mention we have to use flash media encoder to stream to wildearth.tv and the axis 214 will not produce h264 stream,,, so i run manycam in between and send stream to wildearth via manycam source
> webpages.charter.net/jray59/
blog.manycam.com/?p=196&cpage=2#comment-8371
here are some of my posts trying to get a solution for an auto restart setup...
On 1/23/2011 10:12 AM, J`R wrote:
> trying in the manycam forum to see if a script can be written,,, or if the program can be slightly changed
>
> jim ray says:
> January 23, 2011 at 11:09 am
>
> any gurus in here that can tell me how to make a restart script for manycam. our internet service ocassionally drops out,, then manycam looses the axis capture driver,,,( its source). we have to right click on tray icon,, exit, then start manycam,, then select source.. this is not really a manycam problem,,, but when i ran the webcam using windows media encoder someone wrote a restart script..
>
> thnx
> jim ray
> jim ray says:
> January 23, 2011 at 11:17 am
>
> forgot to mention we have to use flash media encoder to stream to wildearth.tv and the axis 214 will not produce h264 stream,,, so i run manycam in between and send stream to wildearth via manycam source
> webpages.charter.net/jray59/
blog.manycam.com/?p=196&cpage=2#comment-8371